Untitled Page
PVC Wire Saw NO. 139
PVC Pipe Cutter, perfect for tight spots and for quick cuts.
No more relying on your hacksaw. The PVC Wire Saw cuts faster and easier and only needs 1/4” clearance in tight spots. Although the PVC Wire Saw cuts with friction-produced heat, it easily cuts through water-filled pipes.

Black Algae Scraper NO. 145
Pool Tool’s new Black Algae Scraper is an easy way to remove black algae from plaster pools, and is more effective than a wire brush. The Black Algae Scraper snaps onto any telepole and easily scrapes the algae off pool. It is also helpful for smoothing rough calcium deposits.

Light Wedge NO. 132
Holds pool light in when niche tab is stripped or broken. Fits all lights. Keep one in your truck!
• The Light Wedge is an inexpensive way to fix broken niche tab.
• It’s easy to use and can be installed in less than five minutes!
• Made with corrosion resistant polypropylene with a stainless steel screw.

Mini Saw NO. 121
Mini Hacksaw for tight spot.
• This useful hacksaw has a 6” blade to easily cut through PVC or copper pipe where space is limited.
• Brightly finished spring steel frame with a high speed steel blade and a rubber finger guard.
Replacement Blades (NO.121-R): Long lasting high speed steel. 32 teeth per inch. Package of ten.

Plug Removing Tool NO. 147
Remove winterizing plugs effortlessly!
Specially designed for removal and installation of winterizing plugs.

Closed Impeller Kit NO. 141
Unclog hard to clean closed face impellers!
No more clogged impellers!
Impeller Pick slides smoothly into veins of closed face impellers. Impeller Tweezers specially designed with a 45 degree angle to remove debris
caught in the center of closed face impellers. Pouch is designed to be reuseable and to help prevent lost of tools.

Magnetic Pole Adapter NO. 112A
Snaps onto the end of your Tele-Pole. Picks up metal objects that will cause hard to remove rust stains.

Rail Puller NO. 103
For hard to remove grab rails or ladders. Forged steel puller bolts around Grab Rail or Ladder. Just use a 7/8” open end wrench and tighten nuts evenly. The puller will lift the rail out of the anchor socket. Made in USA, Patent Pending.

Armature Protector NO. 120
Steel cup protects armature ends from bearing puller damage.Made in the U.S.A. ofmachine cold rolled steel.

Diverter Removing Tool NO. 126
Skimmer diverter valves may get stuck in one position. The removing tool fits into any brass
or plastic diverter and easily loosens it. Fits on any 3/8 drive socket extension.
18” 3/8 drive socket extension (No. 126A)

Handrail Stabilizing Plug No. 148
The jig that supports handrails collapses slightly when used, causing the through bolt (and the handrail) to loosen. The Stabilizing Plug, when tapped into the jig, prevents the jig from collapsing and creates a solid area to tighten the nut and bolt against.

Security Clip No.132-A
Holds pool light in when niche tab is stripped or broken. Fits all lights. Keep one in your truck!
• The Security Clip is an inexpensive way to fix broken niche tab.
• It’s easy to use and can be installed in less than five minutes!
• Made with corrosion resistant stainless steel.

Open End Wrenchs NO.133
2 Piece SAE Obstruction Wrench set.
• “Half moon” shape for accessing hard to reach places.
• Drop forged, heat treated, chrome plated steel for a long corrosion resistant life.
• Fits all popular pool & spa nut and bolt sizes: 7/16”, 1/2”, 9/16” and 5/8”.

Ring Rail Stabilizing Plug No. 140
The anchor will crush the rail causing it to become unstable. Plugs round out the rail providing a strong surface for the anchor. Set of four machined aluminum plugs. For use on S.R. Smith #RRH-100-B
Shaft Puller NO. 100
Shaft Puller allows for easy removal of seal shaft extensions from keyed shaft pump motors. This time saving tool can be used on Sta-Rite, H&F, Pac Fab, American Products, Premier, Aqua Flo and Anthony motor seal shafts.

Main Drain Cover Test Hook NO. 122

Main Drain Test Mat NO. 125A
The main drain test mat connects to the telescopic pole and covers main drain to allow periodic testing of an SVRS Device.

Lid Removing Tool NO. 110
Excellent for removing the tightest most stubborn lids.
The popular Pool Tool Lid Removing Tool is specially designed to remove Sta-Rite, American Products, Swim-Quip and Hayward strainer lids with ease. Its simple design is light weight yet strong enough to provide a lifetime of service and we guarantee it! Made in the U.S.A. of zinc plated steel.

Clamp Knob Wrench NO. 143
Removes or tightens clamp knobs on filter tank lids and pumps trainer lids.
To ensure even tightening, extra heavy handle can be used to tap clamp band. Made in the U.S.A. of high quality cast stainless steel. 9” long and 3lbs.

Plug 'n Hook NO. 152
A back saving tool!
• Fits any tile brush handle.
• Hook removes skimmer lids and baskets without bending over.
• Designed to plug one skimmer on multiple skimmer systems to increase suction while vacuuming.
Skimmer Weir Conversion NO. 130
Broken or missing weir blades? Solution: Convert your U-3 type skimmer into a circular weir. Adapter snaps into skimmer basket, allowing the use of a circular weir. Patent Pending

B9 Basket NO. 130-A

1/8" T-Wrenches NO. 114
5/32" T-Wrenches NO. 115
Handy, long lastingT-Handle Hex Wrenches for the pool and spa repairand service trades.
• Continuous one piece construction with integral loop handle, provides maximum torque even in areas that are hard to reach.
• Made to close tolerances of high quality chrome nickel alloy steel.
• Hardened and tempered by a special martempering process for maximum strength.
• Long 6” length for accessing hard to reach set screws. This extra long length makes it possible to grind wrench down to a new edge many times.

Spa Jet Cleaner NO. 138
Cleans out hard to reach spa jet orifices.
• Specially designed barbed end to make cleaning clogged jets easy.
• 3 feet long to reach any spa jet orifice.
• Will not corrode.

Armature Holding Tool NO. 128
For repairing and rebuilding of Century and Franklin pump motors.
• With the Pool Tool Armature Holding Tool you can hold old style Century and Franklin armatures in place for impeller removal.
• Unlike a screwdriver, this inexpensive tool is machined to precisely fit the slotted end of the armature so it will not slip out and strip the slot.
• This tool fits a 1/2” socket wrench for excellent leverage to remove even the most stubborn impellers.

Handrail Stabilizing Plug for Anchor Handrails No. 144-A for 1.900” ID & 144-B for 1.875” ID
Anchor type handrails are often crushed at the end by the underground anchor causing the handrail to loosen and become unstable. Sizing Gauge Included. When hammered into the crushed end of the handrail, the Handrail Stabilizing Plug rounds it out and provides a permanent strong supporting surface for the anchor to tighten against.

Drain Suction Mat NO.125
NEW! Creates more suction at the skimmer!
• The Main Drain Suction Mat covers main drain to create more suction at the skimmer for easier vacuuming.
• Use net to push mat into place and to catch hook for easy removal.
• Made of flexible PVC with a stainless steel hook.

Magnetic Pole Tips No.112-s and No. 112-p
Pick up nails and other metal objects that are too small to be scooped up by your net and that would otherwise cause ugly, hard-toremove rust stains.
• Two styles to choose from: Standard 112-S or Professional 112-P
• Durable plastic with a powerful built in ceramic magnet. Will not corrode.
• Bright orange color allows pool men to legally carry poles that extend beyond the end of their pick-up trucks.
Impeller Wedge NO. 111
Designed especially for portable spa booster pumps. Prevents impeller from moving while turning armature counter-clockwise so impeller will unscrew. Made in U.S.A.

Motor Bearing Puller NO. 117
Easily removes the most stubborn bearings
The unique design allows the puller fingers to fit behind all pool motor bearings. Armature protector included. Made in U.S.A.

1/8" Hex Wrench Holder NO. 118
Back by popular demand!
Stainless steel holder with sliding handle for leverage. Tap end of holder with a hammer to loosen tight set screws.
Made in U.S.A.
1/8” Replacement Hex Wrench (No. 119)

Open Impeller Wrench NO. 101
Pool Tool Impeller Wrenches will save time on most pump repair jobs by effortlessly removing pump impellers.
• Easy to use.
• Will not damage impeller.
• Versatile, fits all open faced impellers.
• Provides enough leverage to remove even the most stubborn impellers.
• Rugged steel and aluminum construction for a lifetime of service, and we guarantee it!

Closed Impeller Wrench NO. 127
• Versatile, fits all closed impellers.
• Large handle for excellent leverage.
• Will not cause damage to impeller vanes as would be caused by using a screwdriver to turn impeller.
• Made of durable stainless steel and polypropylene for years of service.
Zinc Anode Weight NO. 104A
Stop metal and plaster corrosion! A must for salt water pools!
Zinc Anode Weight was designed to stop metal erosion, and plaster discoloration due to galvanic corrosion. Keeps skimmer basket in place. Bolts permanently inside or outside any skimmer basket..

Anti-Electrolysis Zinc Anode NO. 104B
Elimates plaster staining and metal corrosion due to galvanic corrosion. Permanently bolts to ladder or grab rail below water line. A must for salt water pools.

Inline Zinc Anode NO. 104C
The inline zinc anode is attached to the bonding wire thereby protecting all metal parts against the effects of galvanic corrosion. Available in 1-1/2” and 2”. The see through housing allows the anode to be easily replaced when depleted. No replumbing required. A must for salt water pools. Replacement Anode (No. 104 C-1)

2" Slip x Slip Inline Zinc Anode NO. 104D
Helps protect heaters, pool lights and rails
from damage due to galvanic corrosion.
Inline zinc anode for new installations - 4 feet of #8 copper bonding wire included.

Zinc Anode Pool Light Protector NO. 104F
Anti Electrolysis Zinc Anode helps protect pool lights from damage due to galvanic corrosion.
• Black stain around pool light.
• Erosion of the stainless steel light & nitch.
• Discoloration of the chrome face plate.

Deck Anchor Repair Plate NO. 146
Stainless steel plate provides a strong base for
the wedge to pull up against. Also guarantees proper electric bonding.

Discharge Hose Coupler No. 150
Quick and easy way to connect discharge hose.
• Tapered body and compression ring prevents leaks.
• No need for hose clamps.
• Ideal for adding extra lengths of hose.

Male Threaded Adapter No. 151

Zinc Anode Spigot No. 104D-Spigot
Slips into any 2” Tee! The inline zinc anode is attached to the bonding wire thereby protecting all metal parts against the effects of galvanic corrosion. The see through housing allows the anode to be easily replaced when depleted.
Untitled Page

© 2008 Pool Tool Co Inc. • All rights reserved • Site Design: CID